Fixed Steel Narrowline

• 12 mesh .023-inch diameter stainless steel
• 12 mesh .028-inch diameter stainless steel

• 1" x 1 1/2" wide, "L" shape
• Extruded 6063-T6 aluminum alloy
• Weight .410 lbs/ft. with a nominal thickness of .075-inch
• Corners mitered, fitted with an internal tension coupling assembly and fastened
• The screen frame has an integral groove for a combination cushioning strip / insect shield.
• Removable concealment plate, extruded 6063-T6 aluminum, .050-inch tick, weighing .068 lbs./ft. and is attached to the main frame using tamper resistant screws.

Operable Steel Narrowline

• 12 mesh .028-inch diameter stainless steel
• 10 mesh .047-inch diameter stainless steel

• 16 gauge mill-galvannealed with 63% open area
• 14 gauge mill-galvannealed with 51% open area
• 18 gauge stainless steel with 63% open area

• 16-gauge 1" x 1" seamless welded galvanized steel tubing
• High strength die cast metal corners are pneumatically inserted into the frame ends with an interference fit
• Removable face plate, extruded 6063-T6 aluminum, .062-inch thick .212 lbs./ft. is attached to the sides of the main frame using square drive Tek screws. The faceplate corner bead integrates with the sub-frame to conceal the hardware and fasteners.

• Channel design, extruded of 6063-T6-aluminum, .515 lbs./ft., .090 inch thick.
• Corners are mitered and secured by an internal tension coupling assembly and shall be resistant to both torsion and flexural failure.
• The sub-frame has a continuous groove retaining a combination cushioning strip/insect shield.
• The depth of the sub-frame is 1 3/4"

• Panels are attached to the mainframe with hex-head Tek Screws.
• Wire cloth is hemmed 180 degrees and retained by Hex-head Tek Screws.
• Hex-head Tek screws penetrate the infill and main frame at approximately 4" on center.

• Screens have two steel latches, which operate simultaneously from a Roto-Lift™ emergency release. Each Roto-Lift™ is outfitted with a secure spring-loaded activator to rotate the inhibitor allowing the steel latches to open. When activated, the steel latches simultaneously release and the screen opens for instant egress. No plastic parts will be accepted.
• Screens have a tamper shield installed at the emergency release to protect the screen hardware from exterior tampering.
• Optional lock: Exterior mounted, keyed cam lock

• Screen have two or more concealed 13-gauge, electroplated steel hinges with 1/4" diameter hardened, loose stainless steel pins and integral compression guards.
• Screen are .062-inch thick 3/4" x 1" aluminum scribes at the head and jambs if required.
• Screens come fully assembled and tested from the factory.

Inset Mount Aluminum Crime Shield

Certification

• SMA 6001-85 compliant with impact, sag and forced entry resistance tests
• AAMA Notice of Product Certification - compliant with CFR 200.935 as "Security Screen - Heavy"

Infill

• 18 gauge stainless steel perforated panel with 63% open area
• 16 gauge mill-galvannealed steel perforated panel with 63% open area
• 14 gauge mill-galvannealed steel perforated panel with 51% open area
• 12 gauge mill-galvannealed steel perforated panel with 51% open area
• Optional additional insect screening

Main Frame

• 1 3/16" x 1 3/8" extruded 6063-T6 aluminum, .080-inch thick
• Corners are mitered and fitted with an internal corner assembly to allow self-aligning and welded.
• Removable barrier back rail, extruded from 6063-T6 aluminum, .030- inch thick, .088 lbs./ft. and is attached to main frame using tamper resistant screws.

Sub-frame

• Extruded 6063-T6 aluminum, .090 inch thick. 
• Corners are mitered and secured by an internal tension coupling resistant to both torsion and flexural strength.

Perforated Panel Attachment

• Perforated panels are retained by a removable barrier back rail and tamper resistant screws.
• Tamper resistant screws penetrate the barrier back rail, perforated panel and barrier frame at approximately 6" on center.

Emergency Egress Release

• Barriers operate through a single point release mechanism.  When the egress release is activated, a sliding planar motion frees the barrier from the frame retention members allowing an outward pivoting motion opening the panel.
• Barriers have a tamper shield installed at the emergency release to prevent tampering of the release mechanism from the exterior 

Hardware

• Barriers have two clevis hinge pins to provide tracking when the barrier is opened

Flush Mount Aluminum Crime Shield

Certification

• SMA 6001-85 compliant with impact, sag and forced entry resistance tests
• AAMA Notice of Product Certification - compliant with CFR 200.935 as "Security Screen - Heavy"

Infill

• 18 gauge stainless steel perforated panel with 63% open area
• 16 gauge mill-galvannealed steel perforated panel with 63% open area
• 14 gauge mill-galvannealed steel perforated panel with 51% open area
• 12 gauge mill-galvannealed steel perforated panel with 51% open area
• Optional additional insect screening

Main Frame

• 1 3/16" x 1 3/8" extruded 6063-T6 aluminum, .080-inch thick
• Corners are mitered and fitted with an internal corner assembly to allow self-aligning and welded.
• Removable barrier back rail, extruded from 6063-T6 aluminum, .030- inch thick, .088 lbs./ft. and is attached to main frame using tamper resistant screws.

Sub-frame

• Extruded 6063-T6 aluminum, .090 inch thick. 
• Corners are mitered and secured by an internal tension coupling resistant to both torsion and flexural strength.

Perforated Panel Attachment

• Perforated panels are retained by a removable barrier back rail and tamper resistant screws.
• Tamper resistant screws penetrate the barrier back rail, perforated panel and barrier frame at approximately 6" on center.

Emergency Egress Release

• Barriers operate through a single point release mechanism
• When the egress release is activated, a sliding planar motion frees the barrier from the frame retention members allowing an outward pivoting motion opening the panel.
• Barriers have a tamper shield installed at the emergency release to prevent tampering of the release mechanism from the exterior

Hardware

• Barriers have two clevis hinge pins to provide tracking when the barrier is opened